Advance & Conventional NDT

Giant Indo's Veritas Pvt Ltd

Engineering industries often find that problems arise for which existing methods fail to provide the immediate answer. To solve these kinds of problem, innovative thinking that can produce novel techniques and new equipment is often required. GIV is constantly seeking out more effective processes in order to better serve your needs. We have many years’ worth of experience in being able to respond to the needs of industry and quickly provide answers to the inspection challenges that arise. Our specialized applications will help you to enhance inspection quality, simplify processes, speed up your inspection setups and realize easier interpretation. With our state of the art inspection technologies you will save overall maintenance costs, improve production quality and ensure reliable operating processes. We can provide a full range of services in the field of advanced NDT through our global network. All our operators are qualified and certified and can perform inspections to any international code, standard or customer specification.

Non-destructive testing has become a widely used solution for numerous types of industrial project in the manufacturing, construction, plant operation and other engineering sectors. There are many different NDT methods available, each of which has both advantages and disadvantages. Our NDT team provides qualified inspectors with the capability to choose the right method to solve the inspection or testing challenge any industrial project might face. As a result, you can be sure of both safe operation and improved quality while reducing overall cost. We perform shop or field inspections wherever required to any code, standard or customer specification.

Advanced NDT


I. Computed Radiography Services


Computed Radiography from GIV allows precise imaging with greater picture enhancement.

Higher-Quality X-Rays at Lower Cost with Computed Radiography Services


Giant Indo's Veritas Pvt Ltd

To ensure higher-quality X-rays and to reduce costs, in in industrial radiography, businesses are turning to computed radiography (CR) – a digital X-ray process that doesn’t require film or development chemicals.

GIV offers high-quality and convenient computed radiography services. Which means you can enjoy the advantages of an industrial CR system without having to invest in the expensive equipment needed to perform it.>> readmore

II. Corrosion Mapping Services


Improve the reliability of your condition assessment and maintenance strategies with our ultrasonic imaging.

Early Observation of Corrosion


Corrosion and erosion can inflict significant damage upon petrochemical vessels and pipework. Other phenomena such as hydrogen induced cracking and high temperature hydrogen attack can also prove costly in plant operation. Due to the risks involved, it is important to recognise corrosion damage as early as possible, especially when such knowledge can assist in planning your operational maintenace strategy.

Giant Indo's Veritas Pvt Ltd

We have the expertise necessary to demonstrate and define the true condition of your plant. With our corrosion mapping system, SeeScan®, a solution is available to assist you in developing condition-determined maintenance strategies which can be used in the calculations for the remaining lifetime of a plant. Our strategies can also be used within a structured plant maintenance program. SeeScan also offers a visual representation of the results with a comprehensive report of the affected areas helping you to avoid unplanned shutdowns. This service is available worldwide, with techniques applied by highly trained and qualified staff who are greatly experienced in ultrasonic corrosion detection.

GIV is part of the GIV Group specialized in providing a complete range of advanced non-destructive testing (NDT) services. In addition to operating a competence center for advanced NDT based in the Netherlands, it maintains branches in the United Kingdom, Belgium, Germany and Saudi Arabia. Acknowledged as leaders in the field, GIV invests heavily in R&D and operates an accredited training school for advanced NDT as well as offering its expert services globally.>> readmore

III. High Temperature NDT Inspection Services


GIV provides high temperature ultrasonic testing services up to 500°C.

High Temperature NDT Inspection Overview


Giant Indo's Veritas Pvt Ltd

To assist plant operators in maximising the availability of their assets and to reduce their shutdown time, GIV has developed an online inspection strategy at plant operating temperature.

For in-service inspections when the plant is in full operation, GIV has developed a set of “standard” procedures to be able to do corrosion mapping and weld inspections up to 350 deg C. The result is that we can deploy the technique fast, reliable and at reasonable costs.

For inspections from 350 deg C up to 475 deg C or special configurations or special materials, we can develop and validate a specific procedure. A validation block is needed, which will be heated up in the test phase during the preparation. The validation block will be prepared with artificial defects so that it is representative for the client demands. During the preparation phase we will prove what can be reliable detected and sized.

For pre-service inspections on heavy wall vessels or on the so called “golden” welds, we have the possibility to inspect the partially filled weld at pre-heat temperature.

Available techniques are: TOFD, Phased Array, Seescan corrosion mapping, UT wall thickness point measurements, EMAT point measurements and Pulsed Eddy Current corrosion monitoring.>> readmore

IV. Pulsed Eddy-Current (PEC)


Detection of Corrosion Uunder Insulation (CUI).

Inspection Through Insulation


Giant Indo's Veritas Pvt Ltd

To be able to assess the condition of pipework and pressure vessels underneath insulation has many advantages for plant operators. It is also possible to accurately monitor corrosion using the same methodology. Developed primarily by Shell Global Solutions in order to serve their own needs, Pulsed Eddy-Current inspection technology is now commercially available by GIV who holds an operating license for PEC inspection equipment. This license was awarded under our strict staff competence regime and Shell were satisfied with our technical procedures.

Compared with conventional eddy current testing , during a PEC inspection there is no need for direct contact with the object being tested. Measurements can be made through coatings, insulation materials, weather sheeting and even corrosion products.This means that inspections can be carried out through any material that does not conduct electricity. It is a very useful characteristic that also enables high temperature testing or offshore well inspections.

GIV specialized in providing a complete range of advanced non-destructive testing (NDT) services. In addition to operating a competence center for advanced NDT based in the Netherlands, it maintains branches in the United Kingdom, Belgium, Germany and Saudi Arabia. Acknowledged as leaders in the field, GIV invests heavily in R&D and operates an accredited training school for advanced NDT as well as offering its expert services globally.>> readmore

Conventional NDT


I. Ultrasonic Testing (UT) Services


Detect minute flaws or discontinuities in a product with GIV’s Ultrasonic Testing services.

Detect Flaws Faster and Better with Ultrasonic Testing


Giant Indo's Veritas Pvt Ltd

Detecting flaws early on is of utmost importance. But you don’t want the process to be time consuming or costly.

To help you, GIV offers ultrasonic testing (UT) services for thickness testing. By using ultrasonics, we can detect extremely small flaws or discontinuities in a product, with only one surface needing to be exposed. Our equipment is portable and can provide quick and highly accurate inspections.>> readmore

II. Visual Inspection Services


GIV experts have years of experience and expertise in Visual Inspection services

Find Defects Early and Save Money with Visual Inspection Services


Giant Indo's Veritas Pvt Ltd

Once they are in the field, defective parts can be costly to repair. To help you avoid these extra costs, GIV's trained professionals use visual inspection on welds to find and determine small defects.

Our certified welding inspectors (CWIs) are trained to determine the various lengths, measurements, and quality of welded parts and components and to verify that the product meets the requirements of the specifications – whether it is military, automotive, construction, or aerospace. We also offer a specific inspection service for welds in use in locks and dams.

To provide visual inspection services, our visual inspectors can travel to any location around the world. They have extensive training and experience – making GIV the inspection agency of choice.>> readmore